2026/04/29    [공지] FSP 제품 서비스 업무 종료 안내
2026/04/24    2026년 5월 연휴 휴무 안내


제품 스펙 : FSP460-631U New Page 2
Output Voltage Min. load Max. load Load Reg. Ripple & Noise
+5Vsb 0.0A 2.0A +5%-4% 50mV P-P
-5V 0.0A 0.3A ±10% 120mV P-P
-12V 0.0A 0.8A +9%-5% 120mV P-P
+12V3 0.5A 8.0A +5%-4% 120mV P-P
+12V2 0.5A 12.0A +5%-4% 120mV P-P
+12V1 1.0A 16.5A +5%-4% 120mV P-P
+5V 0.5A 30.0A +5%-4% 50mV P-P
+3.3V 0.5A 30.0A +5%-4% 50mV P-P

Safety
Features
　
  • Support Intel Nocona CPU
  • High efficiency
  • Low Ripple & Noise
  • Output over voltage protection
  • Short circuit protection on all outputs
  • Resetable power shut down
  • 100% burn-in under high ambient temperature(50℃)
  • Vacuum-impregnated transformer
  • MTBF:100K hours at 25℃
  • 100% Hi-pot tested
  • line input fuse protection
Specifications
　 　
INPUT SPECIFICATIONS  　
       ˙Input voltage:  Full Range Input
       ˙Input frequency: 47 Hz to 63 Hz
       ˙Inrush current: 80Amps-peak/115Vac
120Amps-peak/230Vac
       ˙Input current: 9.0Amps/115Vac
5.0Amps/230Vac
　

OUTPUT SPECIFICATIONS 　
       ˙Over voltage protection: +12V3 output:15.6V max;
+12V2 output:15.6V max;
+12V1 output:15.6V max;
+5V output: 6.5V max;
+3.3V output: 4.5V max. 
       ˙Overload protection: +5V:    45Amps;
+3.3V: 50Amps; 
+12V1:19.5Amps;
+12V2:19.5Amps;
+12V3:19.5Amps.
       ˙Short circuit protection: The short circuit on any DC output shall not cause any damage to the power supply, including the primary fuse.
　
GENERAL SPECIFICATIONS 　
       ˙Hold-up time: 18ms at 115Vac/60Hz,
18ms at 230Vac/50Hz.
       ˙Efficiency: 65% min. 115Vac at full load
       ˙MTBF: 100,000 hours at full load at 25℃
       ˙Power good signal: 100ms to 500 ms
　


ENVIRONMENTAL SPECIFICATIONS
      ˙Operating temperature: 0℃ to +50℃
      ˙Storage temperature: -20℃ to +80℃
      ˙Relative humidity: 5% to 95% RH non-condensing
　
OutPut
　
Output Voltage Min. load Max. load Load Reg. Ripple & Noise
+5Vsb 0.0A 2.0A +5%-4% 50mV P-P
-5V 0.0A 0.3A ±10% 120mV P-P
-12V 0.0A 0.8A +9%-5% 120mV P-P
+12V3 0.5A 8.0A +5%-4% 120mV P-P
+12V2 0.5A 12.0A +5%-4% 120mV P-P
+12V1 1.0A 16.5A +5%-4% 120mV P-P
+5V 0.5A 30.0A +5%-4% 50mV P-P
+3.3V 0.5A 30.0A +5%-4% 50mV P-P

‧+3.3V & +5V total output shall not exceed 200 W.
‧-5V &-12V total output shall not exceed 10 W.
‧+3.3 V &+5V & +12V total output shall not exceed 440W.