2026/04/29    [공지] FSP 제품 서비스 업무 종료 안내
2026/04/24    2026년 5월 연휴 휴무 안내


제품 스펙 : SP550-80GLC
Output Voltage Min. load Max. load Load Reg. Ripple & Noise
+3.3V 0.8A 36A +-5% 100mV P-P
+5V 0.5A 30A +-5% 100mV P-P
+12V1 0A 15A +-5% 200mV P-P
+12V2 0A 15A +-5% 200mV P-P
+12V3 0.9A 15A +-5% 200mV P-P
+12V4 0.1A 15A +-5% 200mV P-P
+5VSB 0A 2.0A +-5% 100mV P-P
-12V 0A 0.5A -10% 200mV P-P

Safety
　
Features
　
  • High efficiency
  • Low Ripple & Noise
  • Output over voltage protection
  • Short circuit protection on all outputs
  • Resettable power shut down
  • INTERNAL 8 cm fan
  • Low Noise Design at full load
  • 100% burn-in under high ambient temperature(50°C)
  • Vacuum-impregnated transformer
  • MTBF:100K hours at 25°C
  • 100% Hi-pot tested
  • Line input fuse protection
Specifications
　 　
INPUT SPECIFICATIONS  　
       ˙Input voltage:  115 Vac: 90-132V
230 Vac: 180 to 264 VAC
       ˙Input frequency: 47 to 63 Hz
       ˙Inrush current: no damage/115Vac
no damage/230Vac
       ˙Input current: 6.5Amps/115Vac
3Amps/230Vac

　

OUTPUT SPECIFICATIONS 　
       ˙Over voltage protection: +5V output:   5.6 - 7.0V;
+3.3V output: 3.76V - 4.8V; 
+12VDC output:  13.5 -15.6V
       ˙Over current protection: +5V:   48A;
+3.3V: 60A; 
+12V1, 12V2: 48A;
+12V3, 12V4: 22A
       ˙Short circuit protection: The short circuit on any DC output shall not cause any damage to the power supply, including the primary fuse.
　

GENERAL SPECIFICATIONS 
       ˙Hold-up time: 17ms at 115Vac/60Hz,
       ˙Efficiency: 115Vac at typical load: 80%
230Vac at typical load: 83%
       ˙MTBF: 100,000 hours at full load at 25℃
       ˙Dielectric withstand: Input / output 1800VAC for 1 second, input to 
frame ground 1800VAC for 1second
       ˙Power good signal: 100ms to 500 ms
　


ENVIRONMENTAL SPECIFICATIONS
　

      ˙Operating temperature: 0℃ to +50℃
      ˙Storage temperature: -20℃ to +80℃
      ˙Relative humidity: 5% to 95% RH non-condensing
　
OutPut
　
Output Voltage Min. load Max. load Load Reg. Ripple & Noise
+3.3V 0.8A 36A +-5% 100mV P-P
+5V 0.5A 30A +-5% 100mV P-P
+12V1 0A 15A +-5% 200mV P-P
+12V2 0A 15A +-5% 200mV P-P
+12V3 0.9A 15A +-5% 200mV P-P
+12V4 0.1A 15A +-5% 200mV P-P
+5VSB 0A 2.0A +-5% 100mV P-P
-12V 0A 0.5A -10% 200mV P-P

‧+3.3V &+5V total output not exceed 155W
‧+3.3V & +5V & +12V1 & 12V2 total output not exceed 530W