2026/04/29    [공지] FSP 제품 서비스 업무 종료 안내
2026/04/24    2026년 5월 연휴 휴무 안내


제품 스펙 : FSP550-60PLG
Output Voltage Min. load Max. load Load Reg. Ripple & Noise
-12V 0.0A 0.8A +9%-5% 120mV P-P
+3.3V 0.4A 27.0A +5%-4% 50mV P-P
+5V 3.0A 29.0A +5%-4% 50mV P-P
+5Vsb 0.0a 2.0A +5%-4% 50mV P-P
-5V 0.0A 0.3A ±10% 120mV P-P
+12V 1.5A 36.0A +5%-4% 120mV P-P

Safety
Features
　
  • Support Intel Nocona CPU
  • High efficiency
  • Low Ripple & Noise
  • Output over voltage protection
  • Short circuit protection on all outputs
  • Resettable power shut down
  • INTERNAL 8 cm fan
  • 100% burn-in under high ambient temperature(50℃)
  • Vacuum-impregnated transformer
  • 100% Hi-pot tested
  • Line input fuse protection
    		•
    　
    Specifications
    　 　
    INPUT SPECIFICATIONS  　
           ˙Input voltage:  115VAC: 90-135V
    230VAC: 90 to 265 V
           ˙Input frequency: 47 to 63 Hz
           ˙Inrush current: 80A/115Vac, 120A/230Vac
           ˙Input line current: 10A/115Vac, 5A/230Vac

    　

    OUTPUT SPECIFICATIONS
           ˙Over voltage protection: +5V output:5.6-6.5V; +3.3V output: 3.8-4.5V; +12V output: 13.0-14.5V. 
           ˙Overload protection: +5V output:45A; +3.3V output: 45A; +12V output: 45A. 
           ˙Short circuit protection: The short circuit on any DC output shall not cause any damage to the power supply, including the primary fuse.

    　

    GENERAL SPECIFICATIONS 
           ˙Hold-up time: 17ms at 115Vac/60Hz,
    17ms at 230Vac/50Hz.
           ˙Efficiency: 63%  at 115VAC full load
           ˙MTBF: 100,000 hours at full load at 25℃
           ˙Power good signal: Turn on delay time 100ms to 500 ms
    　


    ENVIRONMENTAL SPECIFICATIONS

          ˙Operating temperature: 0℃ to +30℃
          ˙Storage temperature: -20℃ to +80℃
          ˙Relative humidity: 5% to 90% RH non-condensing
    OutPut
    　
    Output Voltage Min. load Max. load Load Reg. Ripple & Noise
    -12V 0.0A 0.8A +9%-5% 120mV P-P
    +3.3V 0.4A 27.0A +5%-4% 50mV P-P
    +5V 3.0A 29.0A +5%-4% 50mV P-P
    +5Vsb 0.0a 2.0A +5%-4% 50mV P-P
    -5V 0.0A 0.3A ±10% 120mV P-P
    +12V 1.5A 36.0A +5%-4% 120mV P-P

    +3.3V &+5V total output shall not exceed 150 W.

    +3.3V &+5V & +12V total output shall not exceed 528W.