2026/04/29
[공지] FSP 제품 서비스 업무 종료 안내
2026/04/24
2026년 5월 연휴 휴무 안내
제품 스펙 :
FSP200-50NIV
New Page 1
Output Voltage
Min. load
Max. load
Load Reg.
Ripple & Noise
+5Vsb
0.0A
2.0A
+-5%
50mV P-P
-12V
0.0A
0.3A
+-10%
120mV P-P
+12V
0.2A
10A
+-5%
120mV P-P
+5V
2.0A
16A
+-5%
50mV P-P
+3.3V
0.3A
16.7A
+-5%
50mV P-P
Safety
Features
High efficiency
Low Ripple & Noise
Output over voltage protection
Short circuit protection on all outputs
Resetable power shut down
Low Noise Design at full load
100% burn-in under high ambient temperature(50°C)
Vacuum-impregnated transformer
MTBF:100K hours at 25°C
100% Hi-pot tested
Line input fuse protection
Specifications
INPUT SPECIFICATIONS
˙Input voltage:
230 VAC
˙Input frequency:
47 Hz to 63 Hz
˙Inrush current:
shall be limited to 50 amps cold,80amps warm measured at 264 Vrms, 50Hz and coinciding with the AC main voltage peak.
˙Input current:
6 amps maximum / 115 Vrms, 60Hz;
3 amps maximum / 230 Vrms, 50Hz.
OUTPUT SPECIFICATIONS
˙Over voltage protection:
+12V output:15.6V max;
+5V output: 7.0V max;
+3.3V output: 4.3V max.
˙Overload protection:
+5V: 36Amps;
+3.3V: 45Amps;
+12V: 18Amps;
˙Short circuit protection:
The short circuit on any DC output shall not cause any damage to the power supply, including the primary fuse.
GENERAL SPECIFICATIONS
˙Hold-up time:
16.6ms at 115Vac/60Hz(full load);
16.6ms at 230Vac/50Hz(full load).
˙Efficiency:
65% min.
˙MTBF:
100,000 hours at full load at 25℃
˙Power good signal:
115/230V (FULL LOAD) : 100-500mS
ENVIRONMENTAL SPECIFICATIONS
˙Operating temperature:
0℃ to +50℃
˙Storage temperature:
-20℃ to +65℃
˙Relative humidity:
Operating: 90%
Storage:95%
OutPut
Output Voltage
Min. load
Max. load
Load Reg.
Ripple & Noise
+5Vsb
0.0A
2.0A
+-5%
50mV P-P
-12V
0.0A
0.3A
+-10%
120mV P-P
+12V
0.2A
10A
+-5%
120mV P-P
+5V
2.0A
16A
+-5%
50mV P-P
+3.3V
0.3A
16.7A
+-5%
50mV P-P
‧+3.3V &+5V total output not exceed 85W
‧+3.3V & +5V & +12V total output not exceed 135W
