2026/04/29    [공지] FSP 제품 서비스 업무 종료 안내
2026/04/24    2026년 5월 연휴 휴무 안내


제품 스펙 : FSP400-70MP New Page 1
Output Voltage Min. load Max. load Load Reg. Ripple & Noise
-5V 0.0A 0.3A +-10% 100mV P-P
+5Vsb 0.0A 2.0A +-5% 50mV P-P
-12V 0.0A 0.8A +-10% 120mV P-P
+12V2 1.0A 16.0A +-5% 120mV P-P
+12V1 1.0A 15.0A +-5% 120mV P-P
+5V 0.3A 28.0A +-5% 50mV P-P
+3.3V 0.5A 30.0A +-5% 50mV P-P

Safety
Features
　
  • High efficiency
  • Low Ripple & Noise
  • Output over voltage protection
  • Short circuit protection on all outputs
  • Resetable power shut down
  • INTERNAL 8 cm fan
  • Low Noise Design at full load
  • 100% burn-in under high ambient temperature(50°C)
  • Vacuum-impregnated transformer
  • MTBF:100K hours at 25°C
  • 100% Hi-pot tested
  • Line input fuse protection
  • complies with EN61000-3-2
  • AC input full range
Specifications
　      INPUT SPECIFICATIONS    
  • Input voltage:                   90 to 265 VAC   
  • Input frequency:               47 to 63 Hz   
  • Input current:                   8.0A/115Vac, 4.0A/230Vac   

      OUTPUT SPECIFICATIONS      

  • Over voltage protection:     +3.3V: +3.7V - +4.5V 
                                           +5V : +5.7V - + 6.5V 
                                           +12V: +13.3V - +15.6V    
  • Short circuit protection:     The short circuit on any DC output shall not cause 
                                           any damageto the power supply, including the
                                           primary fuse.    
    　

      GENERAL SPECIFICATIONS     

  • Hold-up time:                     20ms at 115Vac/60Hz, 20ms at 230Vac/50Hz.    
  • Efficiency:                          68 %/ 115V; 68%/ 230V (full load)       
  • MTBF:                               100,000 hours at full load at 25℃ 

      ENVIRONMENTAL SPECIFICATIONS    

  • Operating temperature:  0℃ to +50℃  
  • Storage temperature:   -20℃ to +80℃  
  • Relative humidity:  5% to 95% non-condensing
　
OutPut
Output Voltage Min. load Max. load Load Reg. Ripple & Noise
-5V 0.0A 0.3A +-10% 100mV P-P
+5Vsb 0.0A 2.0A +-5% 50mV P-P
-12V 0.0A 0.8A +-10% 120mV P-P
+12V2 1.0A 16.0A +-5% 120mV P-P
+12V1 1.0A 15.0A +-5% 120mV P-P
+5V 0.3A 28.0A +-5% 50mV P-P
+3.3V 0.5A 30.0A +-5% 50mV P-P
‧+3.3V &+5V total output not exceed 200W
‧+3.3V & +5V & +12V total output not exceed 380W