 |
Safety |
|
|
|
|
|
|
Features |
|
| |
- High efficiency
- Low Ripple & Noise
- Output over voltage protection
- Short circuit protection on all outputs
- Resetable power shut down
- Low Noise Design at full load
- 100% burn-in under high ambient temperature(50°C)
- Vacuum-impregnated transformer
- MTBF:100K hours at 25°C
- 100% Hi-pot tested
- Line input fuse protection
|
|
|
|
Specifications |
|
| |
| INPUT SPECIFICATIONS |
|
| ˙Input voltage: |
Full Range Input |
| ˙Input frequency: |
47 Hz to 63 Hz |
| ˙Inrush current: |
50Amps-peak/115Vac
80Amps-peak/230Vac |
| ˙Input current: |
4.0Amps/115Vac
2.0Amps/230Vac |
| OUTPUT SPECIFICATIONS |
| ˙Over voltage protection: |
+12V output:15.6V max;
+5V output: 6.5V max;
+3.3V output: 4.5V max. |
| ˙Overload protection: |
+5V: 32Amps;
+3.3V: 32Amps;
+12V: 20Amps. |
| ˙Short circuit protection: |
The short circuit on any DC output shall not cause any
damage to the power supply, including the primary fuse. |
| GENERAL SPECIFICATIONS |
| ˙Hold-up time: |
17ms at 115Vac/60Hz,
17ms at 230Vac/50Hz. |
| ˙Efficiency: |
68% min. 115Vac at full load
68% min. 230Vac at full load |
| ˙MTBF: |
100,000 hours at full load at 25℃ |
| ˙Power good signal: |
100ms to 500 ms |
ENVIRONMENTAL SPECIFICATIONS
| ˙Operating temperature: |
0℃ to +50℃ |
| ˙Storage temperature: |
-20℃ to +80℃ |
| ˙Relative humidity: |
5% to 95% RH non-condensing |
|
|
|
|
OutPut |
|
|
|
Output Voltage |
Min. load |
Max. load
|
Load Reg. |
Ripple & Noise |
| +5Vsb |
0.0A |
2.0A |
+-5% |
50mV P-P |
| -12V |
0.0A |
0.8A |
+-10% |
120mV P-P |
| +12V |
1.5A |
12.0A |
+-5% |
120mV P-P |
| +5V |
0.5A |
12.0A |
+-5% |
50mV P-P |
| +3.3V |
0.3A |
16.8A |
+-5% |
50mV P-P |
‧+3.3V &+5V total output not exceed 61W
‧+3.3V & +5V & +12V total output not exceed 165W |
