2026/04/29    [°øÁö] FSP Á¦Ç° ¼­ºñ½º ¾÷¹« Á¾·á ¾È³»
2026/04/24    2026³â 5¿ù ¿¬ÈÞ ÈÞ¹« ¾È³»


Á¦Ç° ½ºÆå : FSP300-60MD (PF) New Page 1
Output Voltage Min. load Max. load Load Reg. Ripple & Noise
+5Vsb 0.0A 2.0A +5% 50mV P-P
-5V 0.0A 0.3A +10% 120mV P-P
-12V 0.0A 0.8A +10% 120mV P-P
+12V 0.0A 10A +5% 120mV P-P
+5V 1.5A 30/23A +5% 50mV P-P
+3.3V 0.2A 3/14A +5% 50mV P-P

Safety
Features
¡¡
  • High efficiency
  • Low Ripple & Noise
  • Output over voltage protection
  • Short circuit protection on all outputs
  • Resetable power shut down
  • Low Noise Design at full load
  • 100% burn-in under high ambient temperature(50¡ÆC)
  • Vacuum-impregnated transformer
  • MTBF:100K hours at 25¡ÆC
  • 100% Hi-pot tested
  • Line input fuse protection
Specifications
¡¡
INPUT SPECIFICATIONS  ¡¡
       ¢«Input voltage: 220 / 240VAC
       ¢«Input frequency: 47 Hz to 53 Hz
       ¢«Inrush current: shall be limited to 42 amps cold,70amps warm measured at 264 Vrms, 50Hz and coinciding with the AC main voltage peak.
       ¢«Input current: 4 amps maximum / 230 Vrms, 50Hz.

¡¡

OUTPUT SPECIFICATIONS ¡¡
       ¢«Over voltage protection: +12V output:15.5V max;
+5V output: 6.5V max;
+3.3V output: 4.6V max. 
       ¢«Overload protection: +5V:    60Amps;
+3.3V: 58Amps; 
+12V:  22Amps;
       ¢«Short circuit protection: The short circuit on any DC output shall not cause any damage to the power supply, including the primary fuse.

¡¡

GENERAL SPECIFICATIONS  ¡¡
       ¢«Hold-up time: 10.0ms at 230Vac/50Hz(full load).
       ¢«Efficiency: 65% min.
       ¢«MTBF: 100,000 hours at full load at 25¡É
       ¢«Power good signal: 230V (FULL LOAD) : 100-500mS
¡¡


ENVIRONMENTAL SPECIFICATIONS
      ¢«Operating temperature: 0¡É to +50¡É
      ¢«Storage temperature: -20¡É to +65¡É
      ¢«Relative humidity: Operating: 90%
Storage:95%
¡¡
OutPut
¡¡
Output Voltage Min. load Max. load Load Reg. Ripple & Noise
+5Vsb 0.0A 2.0A +5% 50mV P-P
-5V 0.0A 0.3A +10% 120mV P-P
-12V 0.0A 0.8A +10% 120mV P-P
+12V 0.0A 10A +5% 120mV P-P
+5V 1.5A 30/23A +5% 50mV P-P
+3.3V 0.2A 3/14A +5% 50mV P-P

‧+3.3V &+5V total output not exceed 160W
‧+3.3V & +5V & +12V total output not exceed 280W