2026/04/29    [공지] FSP 제품 서비스 업무 종료 안내
2026/04/24    2026년 5월 연휴 휴무 안내


제품 스펙 : FSP350-50BR2 New Page 1
Output Voltage Min. load Max. load Load Reg. Ripple & Noise
+5Vsb 0.0A 2.5A ±5% 50mV P-P
-12V 0.0A 0.8A ±10% 150mV P-P
+12V 1.0A 15.0A ±5% 120mV P-P
+3.3V 0.3A 28.0A ±5% 50mV P-P
+5V 1.5A 30.0A ±5% 50mV P-P

Safety
Features
　
  • High efficiency
  • Low Ripple & Noise
  • Output over voltage protection
  • Short circuit protection on all outputs
  • Resetable power shut down
  • 100% burn-in under high ambient temperature(50℃)
  • Vacuum-impregnated transformer
  • MTBF:100K hours at 25℃
  • 100% Hi-pot tested
  • Line input fuse protection
Specifications
　
　
INPUT SPECIFICATIONS  　
       ˙Input voltage:  Full Range Input
       ˙Input frequency: 47 Hz to 63 Hz
       ˙Inrush current: 70Amps-peak/115Vac
120Amps-peak/230Vac
       ˙Input current: 7.0Amps/115Vac
3.5Amps/230Vac

　

OUTPUT SPECIFICATIONS 　
       ˙Over voltage protection: +12V output: 14.5V max;
+5V output: 6.5V max..;
+3.3V output: 4.5V max; 
       ˙Over current protection: +5V:    240VA max;
+3.3V: 240VA max;
+12V:  240VA max.
       ˙Short circuit protection: The short circuit on any DC output shall not cause any damage to the power supply, including the primary fuse.

　

GENERAL SPECIFICATIONS 
       ˙Hold-up time: 20ms
       ˙Efficiency: 65% typical at full load and 115Vac input.
       ˙MTBF: 100,000 hours at full load at 25℃
       ˙Power good signal: 50ms to 500 ms
　


ENVIRONMENTAL SPECIFICATIONS
      ˙Operating temperature: +5℃ to +40℃
      ˙Non-Operating temperature: -10℃ to +50℃
      ˙Relative humidity: Operating:20 to 90% non-condensing at 40℃
Non-Operating:5 to 95% non-condensing at 50℃
　
　
OutPut
　
Output Voltage Min. load Max. load Load Reg. Ripple & Noise
+5Vsb 0.0A 2.5A ±5% 50mV P-P
-12V 0.0A 0.8A ±10% 150mV P-P
+12V 1.0A 15.0A ±5% 120mV P-P
+3.3V 0.3A 28.0A ±5% 50mV P-P
+5V 1.5A 30.0A ±5% 50mV P-P
‧+3.3V & +5V total output shall not exceed 157 W.
‧+3.3 V &+5V & +12V total output shall not exceed 330W.