 |
 |
|
 |
|
 |
|
제품 스펙 : FSP600-60BR3
New Page 2
|
Output Voltage |
Min. load |
Max. load
|
Load Reg. |
Ripple & Noise |
| +5Vsb |
0.0A |
2.0A |
±5% |
50mV P-P |
| -5V |
0.0A |
0.3A |
±10% |
100mV P-P |
| -12V |
0.0A |
0.8A |
±10% |
150mV P-P |
| +12V |
1.0A |
16.0A |
±5% |
120mV P-P |
| +3.3V |
0.3A |
20.0A |
±5% |
50mV P-P |
| +5V |
1.5A |
25.0A |
±5% |
50mV P-P |
|
|
 |
|
 |
|
|
 |
|
 |
|
 |
Safety |
|
|
|
|
|
|
Features |
|
| |
˙2+1 redundant power supply design
˙Hot-swappable redundancy function
˙Active current sharing function
˙Module fail buzzer alarm function
˙Module fail LED signal output function
˙Safety approved: UL, CSA, TUV, NEMKO, BSMI, FCC, CE, EMC, C-tick
˙100% burn-in under high ambient temperature
˙100% Hi-pot tested
˙MTBF: 100K hours at 25℃
˙Output over voltage protection
˙Line input fuse protection
˙With 40 x 28mm ball bearing fan per module |
|
|
|
Specifications |
|
| |
| |
| INPUT SPECIFICATIONS |
|
| ˙Input voltage: |
Full Range Input |
| ˙Input frequency: |
47 Hz to 63 Hz |
| ˙Input current: |
6.0Amps/115Vac
3.0Amps/230Vac |
| OUTPUT SPECIFICATIONS |
| ˙Over voltage protection: |
+12V output:14.5V max;
+5V output: 6.5V max;
+3.3V output: 4.5V max. |
| ˙Over Current protection: |
+5V: 240VA max;
+3.3V: 240VA max;
+12V: 240VA max. |
| ˙Short circuit protection: |
The short circuit on any DC output shall not cause
any damage to the power supply, including the primary
fuse. |
| GENERAL SPECIFICATIONS |
| ˙Hold-up time: |
20ms |
| ˙Efficiency: |
65% typical at full load and 115Vac input. |
| ˙MTBF: |
100,000 hours at full load at 25℃ |
| ˙Power good signal: |
50ms to 500 ms |
ENVIRONMENTAL SPECIFICATIONS
| ˙Operating temperature: |
+5℃ to +40℃ |
| ˙Non-Operating temperature: |
-10℃ to +50℃ |
| ˙Relative humidity: |
Operating: 20 to 90% non-condensing at 40℃
Non-Operating: 5 to 95% non-condensing at 50℃ |
|
|
|
|
|
OutPut |
|
| |
|
Output Voltage |
Min. load |
Max. load
|
Load Reg. |
Ripple & Noise |
| +5Vsb |
0.0A |
2.0A |
±5% |
50mV P-P |
| -5V |
0.0A |
0.3A |
±10% |
100mV P-P |
| -12V |
0.0A |
0.8A |
±10% |
150mV P-P |
| +12V |
1.0A |
16.0A |
±5% |
120mV P-P |
| +3.3V |
0.3A |
20.0A |
±5% |
50mV P-P |
| +5V |
1.5A |
25.0A |
±5% |
50mV P-P |
‧The total outputs of module parallel operation for +5V and +3.3V is
limited to under 157*N*0.9 W.
‧The total outputs of module parallel operation is limited to under
300*N*0.9W.
|
|
|
|
 |
|
 |
|
|
|
|
