2026/04/29    [°øÁö] FSP Á¦Ç° ¼­ºñ½º ¾÷¹« Á¾·á ¾È³»
2026/04/24    2026³â 5¿ù ¿¬ÈÞ ÈÞ¹« ¾È³»







FSP300-60LD
Output Voltage Min. load Max. load Load Reg. Ripple & Noise
+3.3V 0.5A 20A +-5% 50 mV P-P
+5V 0.5A 15A +-5% 50 mV P-P
+12V1DC 1.0A 8A +-5% 120mV P-P
+12V2DC 1.0A 16A +-5% 120mV P-P
-12V 0.0A 0.3A +-10% 120mV P-P
+5VSB 0.0A 2.0A +-5% 50mV P-P

¡¤ Å©±â : 175 x 85 x 70 mm
¡¤ Àû¿ë±â±â : µ¥½ºÅ©Å¾
¡¤ Watt : 300
¡¤ PFC : Active PFC
¡¤ Äð¸µÆÒ : 80mmÆÒ
¡¤ Drawing :
Drawing-FSP300-60LD

 FSP300-60LD Ãâ½ÃÀÏ : 2007-05-23 15:51:43

Safety
¡¡
Features
¡¡ • High efficiency
• Low ripple & noise
• Output over voltage protection
• Short circuit protection on all outputs
• Resettable power shut down
• 100% burn-in under high ambient temperature (50¡ÆC)
• MTBF: 100K hours at 25¡ÆC
• Active PFC (Power Factor Correction) circuit
Specifications
¡¡
¡¡
Input Specifications
• Voltage:
¡¡
90~264 VAC
• Frequency: 50/60 Hz
• Input current: 4/2 amps
¡¡
Output Specifications
• Over-voltage protection: +5V: 5.6V~ 7.0V;
+3.3V: 3.76V~ 4.8V;
+12V: 13.0V~ 15.6V;
• Over-current protection: +3.3V:45A ;
+5V:45A ;
+12V1DC:22A
• Remote ON/OFF control: The power supply shall accept a logic collector level which
will disable / enable all output voltage (excluding +5V standby).
• Power good signal: 115/ 230V (full load) 100 - 500 ms
¡¡
General Specifications
• Efficiency: 70%
• Hold-up time: 17.0 ms minimum
¡¡
Environmental Specifications
• Operating conditions:
¡¡
ambient temperature 0¡ÆC~50¡ÆC
• Storage and
  shipping conditions:
ambient temperature -20¡ÆC~80¡ÆC
• Dielectric withstand: input / output 1800 VAC for 1 second,
input to frame ground 1800VAC for 1 second
¡¡
OutPut
¡¡
Output Voltage Min. load Max. load Load Reg. Ripple & Noise
+3.3V 0.5A 20A +-5% 50 mV P-P
+5V 0.5A 15A +-5% 50 mV P-P
+12V1DC 1.0A 8A +-5% 120mV P-P
+12V2DC 1.0A 16A +-5% 120mV P-P
-12V 0.0A 0.3A +-10% 120mV P-P
+5VSB 0.0A 2.0A +-5% 50mV P-P
¡¡

¡¡