• High efficiency
• Low Ripple & Noise
• Output over voltage protection
• Short circuit protection on all outputs
• Resettable power shut down
• INTERNAL 8 cm fan
• Low Noise Design at full load
• 100% burn-in under high ambient temperature(50°C)
• Vacuum-impregnated transformer
• MTBF:100K hours at 25°C
• 100% Hi-pot tested
• Line input fuse protection
• complies with EN61000-3-2
• Full range input 

INPUT SPECIFICATIONS    

• Input voltage:                   90 to 264 VAC   
• Input frequency:               47 to 63 Hz   
• Input current:                   7.5A/115Vac, 3.5A/230Vac   

 OUTPUT SPECIFICATIONS      

• Over voltage protection:     +3.3V: 3.76V - 4.8V 
                                         +5V: 5.6V - 7.0V
                                         12Vdc: 13.5V - 15.6V   
• Over current protection:     The power supply is prevented from output over 
                                         current.   
• Short circuit protection:     The short circuit on any DC output shall not cause 
                                         any damageto the power supply, including the
                                         primary fuse.      
  　

 GENERAL SPECIFICATIONS     

• Hold-up time:                     17ms at 115Vac/60Hz, 17ms at 230Vac/50Hz.    
• Efficiency:                          80 %/115V; 83%/ 230V (Typical load)   
• MTBF:                               100,000 hours at full load at 25℃ 

  ENVIRONMENTAL SPECIFICATIONS    

• Operating temperature:  0℃ to +50℃  
• Storage temperature:   -20℃ to +80℃  
• Relative humidity:  5% to 95% RH; non-condensing

‧+3.3V &+5V total output not exceed 155W
‧+3.3V & +5V & +12V total output not exceed 580W