2026/04/29    [°øÁö] FSP Á¦Ç° ¼­ºñ½º ¾÷¹« Á¾·á ¾È³»
2026/04/24    2026³â 5¿ù ¿¬ÈÞ ÈÞ¹« ¾È³»







FSP350-50BR2
New Page 1
Output Voltage Min. load Max. load Load Reg. Ripple & Noise
+5Vsb 0.0A 2.5A ¡¾5% 50mV P-P
-12V 0.0A 0.8A ¡¾10% 150mV P-P
+12V 1.0A 15.0A ¡¾5% 120mV P-P
+3.3V 0.3A 28.0A ¡¾5% 50mV P-P
+5V 1.5A 30.0A ¡¾5% 50mV P-P

¡¤ Å©±â : 225 x 150 x 86 mm
¡¤ Àû¿ë±â±â : For Server & Workstation
¡¤ Watt : 350
¡¤ PFC : Active
¡¤ Äð¸µÆÒ : ¡¡
¡¤ Drawing :
Drawing

 FSP350-50BR2 Ãâ½ÃÀÏ : 2007-05-28 10:25:22

Safety
Features
¡¡
  • High efficiency
  • Low Ripple & Noise
  • Output over voltage protection
  • Short circuit protection on all outputs
  • Resetable power shut down
  • 100% burn-in under high ambient temperature(50¡É)
  • Vacuum-impregnated transformer
  • MTBF:100K hours at 25¡É
  • 100% Hi-pot tested
  • Line input fuse protection
Specifications
¡¡
¡¡
INPUT SPECIFICATIONS  ¡¡
       ¢«Input voltage:  Full Range Input
       ¢«Input frequency: 47 Hz to 63 Hz
       ¢«Inrush current: 70Amps-peak/115Vac
120Amps-peak/230Vac
       ¢«Input current: 7.0Amps/115Vac
3.5Amps/230Vac

¡¡

OUTPUT SPECIFICATIONS ¡¡
       ¢«Over voltage protection: +12V output: 14.5V max;
+5V output: 6.5V max..;
+3.3V output: 4.5V max; 
       ¢«Over current protection: +5V:    240VA max;
+3.3V: 240VA max;
+12V:  240VA max.
       ¢«Short circuit protection: The short circuit on any DC output shall not cause any damage to the power supply, including the primary fuse.

¡¡

GENERAL SPECIFICATIONS 
       ¢«Hold-up time: 20ms
       ¢«Efficiency: 65% typical at full load and 115Vac input.
       ¢«MTBF: 100,000 hours at full load at 25¡É
       ¢«Power good signal: 50ms to 500 ms
¡¡


ENVIRONMENTAL SPECIFICATIONS
      ¢«Operating temperature: +5¡É to +40¡É
      ¢«Non-Operating temperature: -10¡É to +50¡É
      ¢«Relative humidity: Operating:20 to 90% non-condensing at 40¡É
Non-Operating:5 to 95% non-condensing at 50¡É
¡¡

¡¡
OutPut
¡¡
Output Voltage Min. load Max. load Load Reg. Ripple & Noise
+5Vsb 0.0A 2.5A ¡¾5% 50mV P-P
-12V 0.0A 0.8A ¡¾10% 150mV P-P
+12V 1.0A 15.0A ¡¾5% 120mV P-P
+3.3V 0.3A 28.0A ¡¾5% 50mV P-P
+5V 1.5A 30.0A ¡¾5% 50mV P-P
‧+3.3V & +5V total output shall not exceed 157 W.
‧+3.3 V &+5V & +12V total output shall not exceed 330W.