2026/04/29    [°øÁö] FSP Á¦Ç° ¼­ºñ½º ¾÷¹« Á¾·á ¾È³»
2026/04/24    2026³â 5¿ù ¿¬ÈÞ ÈÞ¹« ¾È³»







FSP550-802U
New Page 2
Output Voltage Min. load Max. load Load Reg. Ripple & Noise
+5Vsb 0.0A 2.0A ¡¾5% 50mV P-P
-5V 0.0A 0.3A ¡¾10% 100mV P-P
-12V 0.0A 0.8A ¡¾10% 120mV P-P
+12V 0.2A 15.0A ¡¾5% 120mV P-P
+5V 1.0A 30/21.5A ¡¾5% 50mV P-P
+3.3V 0.3A 15.1/28.0A ¡¾5% 50mV P-P

¡¤ Å©±â : 106 x 82.2 x 300 mm
¡¤ Àû¿ë±â±â : For Server & Workstation
¡¤ Watt : 550
¡¤ PFC : Active PFC
¡¤ Äð¸µÆÒ : 80mm
¡¤ Drawing :
Drawing

 FSP550-802U Ãâ½ÃÀÏ : 2007-05-25 15:52:16

Safety
Features
¡¡
  • Support Intel Nocona CPU
  • High efficiency
  • Low ripple & Noise
  • Output over voltage protection
  • Short circuit protection on all output
  • 100% burn-in under high ambient temperature (50¡É)
  • Vacuum-impregnated transformer
  • MTBF: 100K hours at 25¡É
  • 100% Hi-pot tested
  • Line input fuse protection
  • With 8cm fan
Specifications
¡¡ ¡¡
  • Remote ON/OFF Control:  The Power supply shall accept a logic open collector 
                                             level which will disable /enable all out put voltage
                                             (excluding +5V standby).
  • Temperature range:         operating 0¡É~50¡É storage-40¡É~+70¡É
  • Temperature coefficient:  0.01 %/¡É
  • Transient response:          Output voltage recovers in less than 1 ms max. following a
                                             25% load change
  • Hold-up time:                    20.0 mS minimum : at 115V / 60 Hz.
                                             20.0 mS minimum : at 230V / 50 Hz.
  • Dielectric withstand:         input / output 1800VAC for 1 second,
                                             input to frame ground 1800VAC for 1 second
  • Humidity:                          5~95% RH
  • Efficiency:                         70% min.115Vac at full load
  • Power good signal:          turn-on delay 100ms to 1000ms
  • Over current protection
  • Over voltage protection:   +5V +3.3V +12V
  • Voltage:                            265 VAC
  • Frequency:                       47Hz to 63Hz
  • Input current:                    7 amps maximum / 115 Vrms
                                             3.5 amps maximum / 230 Vrms
  • Inrush current:                 50 amps cold, 50amps warm measured at 230 Vrm
OutPut
¡¡ ¡¡
Output Voltage Min. load Max. load Load Reg. Ripple & Noise
+5Vsb 0.0A 2.0A ¡¾5% 50mV P-P
-5V 0.0A 0.3A ¡¾10% 100mV P-P
-12V 0.0A 0.8A ¡¾10% 120mV P-P
+12V 0.2A 15.0A ¡¾5% 120mV P-P
+5V 1.0A 30/21.5A ¡¾5% 50mV P-P
+3.3V 0.3A 15.1/28.0A ¡¾5% 50mV P-P

‧+3.3V & +5V total output not exceed 200W.
‧+3.3V & +5V & +12V total output not exceed 530W.
¡¡